White Close-Up 8K HDMI 2.1 Active Optical Cable

A white 8K HDMI 2.1 active optical cable for long runs where a normal copper cable gives up. The two ends are marked Source and Display, so you can see at a glance which way it goes. The housings are white, which suits light-coloured rooms and installs where a black cable would stand out.

This is an active optical HDMI cable, built for distance. The signal travels over fibre for the long stretch, with copper kept for the low-speed control lines. That is what lets it carry a high-bandwidth picture further than a passive copper cable of the same length, and it picks up less interference along the way. The housings are white and moulded, with “8K” printed on the source end. Each end is labelled — Source on one side, Display on the other — and there is a small arrow on each housing pointing the way the signal runs. It only works one way round, so check the labels before you plug it in. On performance: versions of this cable are rated up to 48 Gbps, 8K at 60 Hz and 4K at high refresh rates. That only holds with HDMI 2.1 equipment on both ends and with the validated cable version, so confirm the version and length you are ordering before you promise a customer a specific number. Good for an 8K TV fed from a rack in another room, a 4K high-refresh gaming setup, a big presentation screen, or any run where the source and the display sit a long way apart.

Key facts

  • Directional HDMI Type-A (source) to HDMI Type-A (display)
  • White connector housings
  • “8K” printed on the source-end housing (visible in the photo)
  • Source and Display labels printed on the housings, plus a direction arrow
  • Hybrid optical signal path (fibre for high-speed data, copper for control)
  • 8K HDMI 2.1 positioning; versions rated up to 48 Gbps / 8K at 60 Hz / 4K at high refresh — applies only to validated configurations with compatible HDMI 2.1 source and display equipment
  • Length: not stated in the source — confirm before publishing
  • Exact link rate and refresh capability depend on the SKU ordered.

Compatibility

Works with HDMI source devices (media players, games consoles, PCs, AV receivers) and HDMI displays (TVs, projectors, monitors) that support the resolution you need. Both ends must be HDMI Type-A. The cable is directional: the Source end goes to the source device, the Display end to the display.

Application scenarios

  • 8K display links
  • 4K high-refresh gaming setups
  • Large-format presentation systems
  • Long equipment-rack to display connections
  • Home theatre, commercial AV, digital signage, control and visualisation rooms.

Links

Related products: browse the full range on the AOC HDMI cable overview page.

External link: Changzhou Jinshang Electronic Technology — fibre optic cable manufacturer.