- Home
- Our Products
- STARLINK CABLES
STARLINK CABLES

Starlink Cable, Replacement Extension Cable Waterproof for Actuated Gen 2 Dish and Router. This replacement cable is specially designed for the Starlink Rectangular Satellite V2, with optimal connection guaranteed.
Replacement Starlink Cable aftermarket Standard Actuated Kits of additional length
Replacement Starlink Cable aftermarket Standard Actuated Kits of additional length
$29 $15.9
Starlink Gen 3 Replacement Cable — Shielded CAT5e FTP, 24 AWG, 1 Gbps
A pre-terminated replacement cable for Starlink Gen 3 / V3 Standard systems. Connects the dish to the router with a shielded, weather-resistant CAT5e FTP cable — no field termination needed. Choose 2 m, 10 m, 15 m, 23 m, 30 m or 46 m to fit your route.
Starlink Gen 2 Single-Port Gigabit Ethernet Adapter — RJ45 LAN Adapter, 1 m Lead
The Starlink Gen 2 router has no wired LAN port. This adapter adds one. Plug the adapter into the Gen 2 router, then plug a standard Ethernet cable into the adapter's RJ45 port and run it to your own router, switch, PC, camera, or any Ethernet device. The lead is about 1 m long, so the adapter sits close to the router.
USB-C PD to DC Power Cable for Starlink Mini — 20 AWG, 2–10 m
This cable powers a Starlink Mini from a USB-C PD source instead of the mains. One end is USB-C male, the other is the DC male plug that fits the Mini dish. Plug the USB-C end into a PD power bank, a vehicle PD outlet, or a regulated USB-C supply, and the Mini runs without an AC inverter in the chain. Lengths: 2 m, 3 m, 5 m, 10 m.
DC to DC Power Cable for Starlink Mini — Male-to-Male, 20 AWG, 2–10 m
A replacement DC power lead for Starlink Mini. DC male plug on both ends: one end goes to a compatible DC power source, the other to the Mini dish. Use it when the original lead is damaged, when a second kit needs its own lead, or when a different length routes better in a vehicle, cabin, or campsite. Lengths: 2 m, 3 m, 5 m, 10 m.
Starlink Gen 3 RJ45 Adapter Pair — Waterproof SPX to RJ45, 2 x 0.5 m Leads
Two short adapter leads for Starlink Gen 3. One plugs into the dish side, one into the router side. Each end gives you a waterproof RJ45 socket, so the long run in the middle can be a normal shielded Ethernet cable. If that middle cable ever gets damaged, you swap the middle cable, not the whole Starlink lead.
Starlink Gen 2 Compact RJ45 Adapter Pair — Angled + Straight Leads, 2 x 1 m
A compact two-lead adapter set for Starlink Gen 2. The angled lead goes on the router side, the straight lead on the dish side. Each lead ends in a slim waterproof RJ45 socket, so the long run between them can be an ordinary shielded Ethernet cable. If the middle cable wears out, you replace that cable, not the Starlink leads.
Starlink Gen 2 Large-Shell RJ45 Adapter Pair — Angled + Straight Leads, 2 x 0.5 m
A two-lead adapter set for Starlink Gen 2 with large injection-moulded coupler shells. The angled lead goes on the router side, the straight lead on the dish side. Each lead ends in a waterproof RJ45 female socket with a cap, so the long run between them can be an ordinary shielded Ethernet cable. If the middle cable wears out, you replace that cable, not the Starlink leads.
Starlink Gen 2 Replacement Cable — Shielded CAT5e FTP, 24 AWG, 1 Gbps, 2–46 m
A pre-terminated replacement cable for Starlink Gen 2 / V2 Standard systems. It runs straight from the dish to the router — no field termination, no crimping. Pick 2 m, 10 m, 15 m, 23 m, 30 m or 46 m to fit your route.









