RF ANTENNA CABLE

We design and produce coaxial cable with IEC / 9.5TV / PAL / F Connectors such as Class A++,  Class A+, Class A, Class B TV cable,  Antenna cable and RG6 / 3C-2V/ RG59 screening shielded coaxial cables accord to European Standards EN 50117-2-5 Coaxial cables.

Screening Class A++(105 dB), CLASS A+(95 dB), CLASS A (85 dB),  Class B(75 dB) are valid for cables accord to IEC 61196-6-n and EN 50117-9-n /-10-n series as well as for TV receiver leads accord to 60966-2-4 to 60966-2-7 series, Screening Class A++ is valid for CATV-cables accord to EN 50117-2-3.
Transfer impedance and Screening attenuation of CATV cables shall be measured with the “Triaxial test procedure” according to IEC 62153-4-3  / IEC62153-4-4 (e.g. CoMeT-system). Absorbing clamps are not allowed, due to large uncertainty and poor reproducibility

For aerial installations, two types of connectors are used, the regular antenna connectors used in radio and TV equipment, wall sockets, etc. and F connectors. In practice, antenna cables with standard coax antenna connectors are always used in the form of a male-female cable, i.e. a cable with a male connector on one end and female connector at the other. The difference between antenna cables used for radio and TV is simply that it is reversed.

Cables with F connectors are mainly used between professional amplifiers, splitters, filters and satellite equipment. These cables can naturally be supplied in regular F-connector to F-connector versions, but also as F-connector to antenna connector cables that can be used directly from a professional splitter for a TV.