- Home
- Our Products
- HDMI Cable
- AOC HDMI CABLE
- Black Molded 8K HDMI 2.1 Active Optical Cable
Black Molded 8K HDMI 2.1 Active Optical Cable
A black molded 8K HDMI 2.1 active optical cable for long runs between a source and an 8K display. The two ends are marked Source and Display, so you can see at a glance which way round it goes.
This is the black molded version of our 8K HDMI 2.1 active optical cable. The housings are plain black molded plastic, with a ribbed strain relief where the cable meets the plug. One end is marked Source and carries an 8K mark. The other end is marked Display. It is a directional cable. The Source end goes into the player, console, or PC. The Display end goes into the TV or projector. Put it in the other way round and you get no picture, so check the labels before you run it through a wall or conduit. Inside, the signal travels over fiber for the long stretch, with active modules at each end converting it back to HDMI. That is what makes it useful for long runs, where a plain copper HDMI cable starts to struggle. Fiber also picks up less interference from nearby power cables and equipment. The 48 Gbps / 8K at 60 Hz / 4K at high refresh rates figures apply to the validated 8K HDMI 2.1 version of this cable, and only with source and display gear that supports them. If your setup is 4K, the same cable still works — it just runs at whatever your gear supports. Good for a rack at one end of the room and a screen at the other, a home theater with the gear tucked away, or a meeting room where the cable has to cross the floor or ceiling. No extra power supply is mentioned in the source material, and no cable length is stated — confirm the length you need before ordering.
Key facts
- Directional HDMI Type-A (source) to HDMI Type-A (display)
- Black molded connector housings
- Source end marked “8K”, Display end marked “HDMI”
- Gold-plated connectors (visible in photo)
- Hybrid optical signal path (active optical conversion, fiber segment)
- 48 Gbps, 8K at 60 Hz, and 4K at high refresh rates — as identified in the source for the validated 8K HDMI 2.1 version only; requires compatible source and display devices
- Cable length: NOT stated in the source — confirm before publishing/ordering
- No power requirement stated in the source.
Compatibility
HDMI Type-A sources and displays: TVs, projectors, monitors, games consoles, PCs/laptops, Blu-ray players, AV receivers. 8K/48 Gbps performance needs HDMI 2.1 equipment at both ends; otherwise the link runs at the lower capability of the connected gear.
Application scenarios
- Gaming rooms
- Home theater
- Commercial AV
- Digital signage
- Control and visualization rooms
- Long equipment-rack-to-display connections
Links
Related products: Browse the full range on the AOC HDMI cable overview page.
External link: Visit the manufacturer’s site, JinShang / bhcables home page.

