LEMO to Molex 9-Pin Cable with Exposed Leads

A LEMO plug on one end, a Molex 9-pin housing on the other — and the Molex end left open, with the individual leads terminated and ready to land where your build needs them. It is the version you pick when the far end doesn't go into a fixed socket but gets wired in by hand.

The LEMO end is a metal push-pull plug with a knurled grip and a red boot, the sort of connector that locks in with a click and comes out with a pull. At the other end, the wires fan out into colour-coded twisted leads: a small white Molex 9-pin housing at the tip, plus two bare crimp terminals left exposed for separate termination. The product card lists the construction as AWG26, UL Listed (UL20549).

One thing the photo shows that the name doesn’t mention: a black oval panel-style piece sits on the cable at the Molex end, where the leads break out — the same piece that appears in the bulkhead-grommet version of this cable. No bulkhead or panel-mount function is claimed for this version.

No length is given in the source, so the length is left open and should be confirmed for the order — and so should the pinout, because the leads only help if they land on the right pins. This cable is sold for use with diagnostic and analytical equipment and medical-device subassemblies after device-level validation. It is not itself a certified medical device, and no medical-safety claim is made here.

Key facts

  • LEMO male plug (metal, knurled grip, red boot as pictured) to Molex 9-pin housing with terminated flying leads
  • Colour-coded twisted leads at the Molex end; white 9-pin housing plus two bare crimp terminals visible in the photo
  • Black oval panel-style piece visible on the cable at the Molex end
  • Wire as printed on the product card: AWG26, UL Listed (UL20549)
  • Length: not stated — confirm before ordering
  • Pinout: confirm against the target equipment before ordering
  • Custom length, pinout, labelling and packaging can be specified for production orders (per source)

Compatibility

Made to match equipment with a LEMO socket on one side and a Molex 9-pin mating housing — or a terminal block the flying leads can land on — on the other. Confirm the pin assignment against your drawing or an approved sample; exposed leads give you flexibility, but they also give you room to wire it wrong.

Application scenarios

  • Diagnostic and analytical equipment
  • Medical-device subassemblies after device-level validation
  • Laboratory instruments and service fixtures
  • Service and bench wiring where the far end is terminated by hand

Links

Related models: Detachable HDMI 2.1 Active Optical Cable for Conduit Installation, Long-Distance HDMI Active Optical Cable Product Family, LEMO to Molex 9-Pin Cable with Strain Relief. Also browse the full range on the AOC HDMI cable overview page.

External link: AVAGO optical fiber cables — TOCP Fiber Cable.