- Home
- Our Products
- COMPUTER CABLES
- CUSTOMIZED CABLE
- Microphone and Loudspeaker Equipment Cable Assembly
Microphone and Loudspeaker Equipment Cable Assembly
One cable, two audio jobs: a Molex 4-pin housing on one end, and on the other end a small round microphone capsule and a square loudspeaker driver, each on its own branch. It is an audio and control assembly for inside equipment — the mic picks up sound, the speaker plays it back, and a single connector ties both back to the board.
The photo shows the actual parts, not just connectors. On the left is a small round microphone capsule in a silver shell with a dark mesh face. In the middle is a square black loudspeaker driver with four mounting holes in the corners. On the right, the black leads come together into a black Molex 4-pin housing. The leads are thin black round cable, coiled in the photo, with jacket print just about legible (AWM 22AWG).
This is a cable assembly used with equipment, not a medical device itself, and nothing on this page claims medical certification or patient-contact safety. It fits diagnostic and analytical equipment, medical-device subassemblies after device-level validation, and laboratory instruments. No microphone or speaker specifications are given anywhere in the source — no sensitivity, no impedance, no driver size — so none are claimed here. If the mic or the speaker has to meet a particular spec, that needs a drawing or a sample, not this page.
The product card in the photo prints “AWG22, UL Listed (UL1007)” — that figure is shown only as printed on the card; confirm it against the production drawing rather than taking the card at face value.
Key facts
- Molex 4-pin housing (black) to microphone and loudspeaker branches
- Small round microphone capsule in a silver shell, and a square black loudspeaker driver with four mounting holes (both visible in the photo)
- Thin black round leads
- AWG22, UL Listed (UL1007) (as printed on the product card in the photo only — confirm against the production drawing)
- Length: not stated — confirm before ordering
- Pinout: custom / to be confirmed against the production drawing
- No microphone or loudspeaker performance figures are stated — do not add any
Compatibility
Made to match equipment with a mating Molex 4-pin header and mounting points for the mic capsule and speaker driver shown. Check the housing series, the branch lengths and the mounting dimensions against your equipment before ordering.
Application scenarios
- Audio and control links inside diagnostic and analytical equipment
- Medical-device subassemblies after device-level validation
- Laboratory instruments and service fixtures
- Equipment-specific replacement audio assemblies, once the mating connectors and wiring are confirmed
Links
Related models: Black Braided 8K HDMI 2.1 Active Optical Cable, White Molded 4K HDMI Active Optical Cable. Also browse the full range on the AOC HDMI cable overview page.
External link: JINSHANG — cables and wiring kits.

