- Home
- Our Products
- NetWork Cable
- Ultra-Flexible Cat 5e RJ45 Extension Cable
Ultra-Flexible Cat 5e RJ45 Extension Cable
An ultra-flexible Cat 5e RJ45 extension cable for when the network point is just out of reach. One end is an RJ45 plug, the other is an RJ45 socket in a white moulded housing — plug it into the wall socket or patch panel, then plug the device's own patch lead into the socket end. The lead is a white round cable that bends easily, and the white colour suits light rooms.
This is the “just a bit further” cable. The wall socket is on the wrong side of the desk, the patch panel is a metre too far away, the router sits on the other side of the room — plug this in and the device’s own patch lead carries on from the socket end. No re-terminating, no new run of cable in the wall.
The plug end is a shielded RJ45 plug in silver with a clear tip and a white snagless boot. The socket end is a bigger white moulded housing with a shielded RJ45 socket inside it, so it sits flat and does not pull on the wall socket. The cable between them is a white round lead, flexible enough to route round a desk leg or along a skirting board without fighting you. The source card identifies the cable as Category 5e and gives the construction as AWG26.
That is the full performance information the source gives — there is no speed, frequency or distance figure in the text or on the card, so this page does not claim one. “Cat 5e” here is the category stated on the source card. It is an extension, not a patch lead: it extends an existing RJ45 connection by adding a socket at the far end.
It is an OEM-style assembly as well: length, pinout, labelling and packaging can be specified for a production order, with a drawing and sample approval before volume production. No length is stated in the source, so confirm the length(s) offered before ordering.
Key Facts
- RJ45 plug to RJ45 socket (male-to-female extension), flexible patch cable, identified as Category 5e
- Shielded silver RJ45 plug with clear tip and white snagless boot; white moulded RJ45 socket housing
- White round flexible jacket
- Construction as stated on the source card: AWG26, CAT.5E (the TXT itself does not state an AWG figure)
- Length: not stated — confirm before ordering
- No speed, frequency or distance figure is stated in the source — none claimed here
Compatibility
Works with RJ45 Ethernet sockets — wall outlets, patch panels, switches, routers and any device with an RJ45 Ethernet port. The plug end goes into an RJ45 socket; the device’s own RJ45 patch lead plugs into the socket end.
Application Scenarios
- OEM electronics assembly
- Special-purpose equipment
- Prototype and production integration
- Extending an RJ45 connection that is just out of reach of the wall socket or patch panel
Links
- Related products: Starlink Gen 2 Single-Port Gigabit Ethernet Adapter, Starlink Gen 3 RJ45 Adapter Pair, Ultra-Flexible Cat 8 RJ45 Ethernet Patch Cable, Ultra-Flat Cat 7 RJ45 Ethernet Patch Cable.
- External: Jinshangtec homepage (TOCP Fiber Cable homepage).

