- Home
- Our Products
- NetWork Cable
- RJ45 to F-Type Coaxial Patch Cable
RJ45 to F-Type Coaxial Patch Cable
A short patch lead that joins an RJ45 port straight to an F-type coaxial port, no adapter in between. One end is a shielded RJ45 plug, the other a threaded F-type plug with a centre pin, on a white flexible RG59/U-style cable. It is built as a starting point for OEM equipment jobs — the pinout, length and labelling are specified to the drawing, not guessed.
This is one of those cables that only makes sense once you have seen the equipment it goes into. Some wireless modules, gateways and telemetry boxes have an RJ45-style port on one side and an antenna or RF feed on the other, and rather than stacking adapters you run a single lead between the two. That is what this cable is for.
The RJ45 end is a shielded plug with a clear latch and a ribbed white strain-relief boot. The F-type end is a threaded metal plug — it screws onto its mating socket — with a white moulded body and a short strain-relief collar. The cable itself is white, round and flexible, and the product card describes it as UltraFlex, AWG22, RG59/U.
Because this is an equipment cable, the important part is not on the photo: which RJ45 pins go to the centre conductor and shield of the F-type end. That mapping is project-specific, so it has to come from the drawing or an approved sample. Same goes for length — the source gives no length, so confirm it before ordering. If the mating connectors and the wiring definition check out, this is a clean, single-lead replacement for an adapter stack.
Key Facts
- RJ45 plug to F-type coaxial plug, one continuous assembly
- Shielded RJ45 plug with clear latch and ribbed white strain-relief boot (visible in the photo)
- Threaded metal F-type plug with centre pin and white moulded body (visible in the photo)
- White round flexible cable; product card identifies the shown construction as AWG22, RG59/U, described as UltraFlex
- Custom length, pinout, labelling and packaging can be specified for production projects
- Length: not stated — confirm before ordering
- No bandwidth, impedance, power or ingress claim is made for this cable; performance depends on the approved construction and the mating equipment
Compatibility
Made for equipment with a mating RJ45 port on one side and a mating F-type coaxial socket on the other — typically wireless modules, gateways and telemetry or communications equipment. Check the pinout against your device before ordering: the wiring is defined per project, not fixed by the connector shapes alone.
Application Scenarios
- Wireless modules and gateways
- Telemetry and communications equipment
- Embedded or external antenna integration
- Equipment-specific replacement leads, once the mating connectors and wiring are confirmed
Links
- Related products: AOC HDMI cable overview page, Starlink Gen 2 Single-Port Gigabit Ethernet Adapter, Starlink Gen 3 RJ45 Adapter Pair.
- External: BH Cables shop.

