- Home
- Our Products
- NetWork Cable
- RJ45 to RJ11 Equipment Patch Cable
RJ45 to RJ11 Equipment Patch Cable
A black patch lead with a full-size RJ45 plug on one end and a smaller RJ11 plug on the other, for equipment that needs the two to talk directly. Both plugs are clear-bodied with black moulded boots and ribbed strain relief. Built as a starting point for OEM jobs — length, pinout and labelling are specified to the drawing.
Some boxes have an RJ45 socket and some have an RJ11, and occasionally a piece of equipment needs one of each. This cable is the straightforward answer: RJ45 on one end, RJ11 on the other, no converter in the middle.
In the photo the difference in size is easy to see — the RJ45 plug is the wider one, the RJ11 noticeably narrower, both with clear bodies so the contacts and the coloured wires inside are visible. Both ends have black moulded boots with ribbed strain relief. The cable is black and round, and the jacket print reads 26AWG, 80°C, 300V. The product card identifies the shown construction as AWG26, UL Listed (UL2464), and describes it as UltraFlex.
What the photo cannot tell you is which pins are wired to which — that mapping is defined per project, so it has to come from the drawing or an approved sample. Length is not stated in the source either. If the mating connectors and the wiring check out, this is a tidy single-lead replacement for a two-cable-plus-adapter setup.
Key Facts
- RJ45 plug to RJ11 plug, one continuous assembly
- Clear-bodied RJ45 plug (wider) and RJ11 plug (narrower), both with black moulded boots and ribbed strain relief (visible in the photo)
- Black round flexible cable; jacket print visible in the photo reads 26AWG, 80°C, 300V
- Product card identifies the shown construction as AWG26, UL Listed (UL2464), described as UltraFlex
- Custom length, pinout, labelling and packaging can be specified for production projects
- Length: not stated — confirm before ordering
- No bandwidth, power or ingress claim is made for this cable; any such claim requires validation for the ordered configuration
Compatibility
Made for equipment with a mating RJ45 port on one side and a mating RJ11 port on the other — typically OEM electronics assemblies and special-purpose equipment. Check the contact mapping against your device before ordering: the wiring is defined per project, not fixed by the connector shapes alone.
Application Scenarios
- OEM electronics assembly
- Special-purpose equipment
- Prototype and production integration
- Equipment-specific replacement leads, once the mating connectors and wiring are confirmed

