1. Home
  2. Our Products
  3. AUTO CAR AFTERMARKET PARTS
  4. WIRE HARNESS
  5. 8-Pin to 4-Pin and 3-Pin Automotive Power Harness A

8-Pin to 4-Pin and 3-Pin Automotive Power Harness A

An 8-pin to 4-pin and 3-pin automotive power harness for vehicle electronics work — one black 8-pin housing on one end, splitting to a white 4-pin female housing and a white 3-pin male housing on the other. The product card prints FLR2X, 1.0mm². It is a made-to-order style assembly: length, pinout, labelling and packaging are agreed against the buyer's drawing or an approved sample.

Categories: ,

This is a straightforward branch harness for automotive low-voltage wiring. The black 8-pin housing at one end fans out to two white housings at the other — a 4-pin female and a 3-pin male — so one connection point on the equipment side can feed two separate circuits or modules. The cable itself is black-jacketed and coiled, with white wires visible where the jacket ends at the connectors.

One thing to notice in the photo: the cable runs through a large black rectangular enclosure fitted with two threaded studs. The source text does not describe that enclosure or say what it is for, so this page claims no function for it — it is shown as it appears in the photo. Confirm its details before ordering.

On the practical side, this is the kind of lead that gets specified rather than picked off a shelf. The pin assignment, the branch lengths and the overall length all have to match the host equipment, so buyers should check the mating connectors and approve a sample before ordering in volume. No voltage, current or temperature rating is stated in the source, and none is added here.

Good for vehicle infotainment and control modules, diagnostic and amplifier installs, retrofit work, or an OEM or replacement harness programme where the 8-pin to 4-pin plus 3-pin split is the combination the equipment calls for.

Key Facts

  • Connector configuration: 8-pin housing to 4-pin female housing and 3-pin male housing
  • 4-pin and 3-pin housings are white; 8-pin housing is black (visible in the photo)
  • Cable type and conductor size as printed on the product card: FLR2X, 1.0mm²
  • Black outer jacket; white wires visible at the connector ends in the photo
  • Photo also shows a large black rectangular enclosure with two threaded studs that the cable runs through — not described in the source text
  • Length: not stated — confirm before ordering
  • Pinout: not stated in the source — confirm against a drawing or approved sample
  • No voltage, current, temperature, ingress or certification rating is stated in the source

Compatibility

Built for vehicle electronics integration where the mating side is an 8-pin housing on the equipment end and 4-pin female plus 3-pin male housings on the branch end. Check the mating connector references, keying and pin assignment against the host equipment before ordering — the pin counts are as stated on the product card and in the source text, and the photo is shot at an angle that does not let you count every cavity.

Application Scenarios

Vehicle infotainment and control modules; Diagnostic, amplifier and retrofit systems; OEM or replacement automotive harness programmes

Related Products

Changzhou Jinshang Electronic Technology — fibre optic cable manufacturer