1. Home
  2. Our Products
  3. AUTO CAR AFTERMARKET PARTS
  4. WIRE HARNESS
  5. 8-Pin to Dual 4-Pin Automotive Power Harness A

8-Pin to Dual 4-Pin Automotive Power Harness A

An 8-pin to dual 4-pin automotive power harness: one black 8-pin housing splitting to two black 4-pin housings — a female and a male, the male with a green seal ring. The product card prints FLR2X, 1.0mm². It is a made-to-order assembly for vehicle electronics, so length, pinout, labelling and packaging are agreed against the buyer's drawing or an approved sample.

Categories: ,

This one is the black-housing version of the 8-pin to dual 4-pin split. The 8-pin end is a black housing, and the far end breaks out into two black 4-pin housings: a larger shrouded female and a male with a green seal ring around it. The white and red wires are visible where the black jacket ends at each connector, which makes the branch easy to follow in the photo.

The cable runs through a large black rectangular enclosure fitted with two threaded studs. The source text does not describe that enclosure or say what it is for, so this page claims no function for it; it is described only as shown. Confirm its details before ordering.

Like the rest of this family, this is a harness you specify rather than one you grab off the shelf. The pin assignment and the lengths have to match the host equipment, so check the mating connectors and approve a sample before ordering in volume. No voltage, current or temperature rating is stated in the source, and none is added here.

Good for vehicle infotainment and control modules, diagnostic and amplifier installs, retrofit work, or an OEM or replacement harness programme where an 8-pin feed needs to split to two 4-pin connections.

Key Facts

  • Connector configuration: 8-pin housing to 4-pin female housing and 4-pin male housing
  • All three housings are black; the 4-pin male housing has a green seal ring (visible in the photo)
  • Cable type and conductor size as printed on the product card: FLR2X, 1.0mm²
  • Black outer jacket; white and red wires visible at the connector ends in the photo
  • Photo also shows a large black rectangular enclosure with two threaded studs that the cable runs through — not described in the source text
  • Length: not stated — confirm before ordering
  • Pinout: not stated in the source — confirm against a drawing or approved sample
  • No voltage, current, temperature, ingress or certification rating is stated in the source

Compatibility

Built for vehicle electronics integration where the mating side is an 8-pin housing on the equipment end and 4-pin female plus 4-pin male housings on the branch end. Check the mating connector references, keying and pin assignment against the host equipment before ordering — the pin counts are as stated on the product card and in the source text, and the photo is shot at an angle that does not let you count every cavity.

Application Scenarios

Vehicle infotainment and control modules; Diagnostic, amplifier and retrofit systems; OEM or replacement automotive harness programmes

Related Products

BH Cables shop — car stereo amp installation wiring kits and cable products