Fiber optic ST connector for electrical machines

Fiber optic ST connector for electrical machines — ST 1000, insertion loss 0.20 dB typical.

Fiber optic ST connector for electrical machines — the plastic fiber optic ST connector, ST 1000, for machine and equipment use. Features: corrosion-resistant and durable, low insertion loss, ST complies with IEC874-10 and CECCBFOC / 2.5, meets the AT&T ST-II standard, complies with IEC-61754. Available assembled, or as complete sets of connector parts. The three photos show the ST connector.

Please read before ordering: the body text on this page is word-for-word identical to the 8778 listing — same header, same features, same applications, same technical specifications. Only the title, the slug and the photos differ, so the two listings cannot be told apart by their text. There is also a mismatch inside the specs: the header says “Plastic Fiber Optic Connector ST 1000”, but the test wavelengths are 1310 nm and 1550 nm — those are glass single-mode wavelengths, not POF (650 nm) wavelengths. The fiber type is listed as “dual mode”, which is odd phrasing and not explained. And “for electrical machines” is title-only — the applications list is generic telecom and LAN (cable network, active device equipment, optical fiber communication, telecommunication network, LANs, WANs, system debugging), nothing machine-specific. The stated technical figures are insertion loss typical ≤0.20 dB and max ≤0.30 dB, return loss ≥50.0 dB, durability 1000 insertions/removals with typical change ≤0.20 dB, working temperature −20 °C to +70 °C, storage −40 °C to +85 °C. Confirm the fiber type before ordering.

Key facts

  • Product: fiber optic ST connector, ST 1000
  • Standards: IEC874-10, CECCBFOC / 2.5, AT&T ST-II, IEC-61754 (as stated)
  • Insertion loss: typical ≤0.20 dB, max ≤0.30 dB
  • Return loss: ≥50.0 dB
  • Durability: 1000 insertions/removals, typical change ≤0.20 dB
  • Working temperature: −20 °C to +70 °C; storage: −40 °C to +85 °C
  • Test wavelength: 1310 nm, 1550 nm (as stated — see the note above)
  • SKU: ST connector

Good for

Terminating fiber on electrical machines and equipment — check the fiber type first, because the page mixes a plastic-fiber header with glass-fiber test wavelengths.

Related products

ST POF vezel connector for electrical machines — identical body text, check both · SC / LC / FC field assembly fast connector · LC–LC optical fiber patch cord

More fiber optic connectors: BH Cables

Fiber optical ST connector for electrical machines

Fiber optical ST connector for electrical machines

Fiber optic ST connector for electrical machines

Fiber optic ST connector for electrical machines

Fiber optic ST connectors for electrical machines

Fiber optic ST connectors for electrical machines