Hirose DF9 to DVI-I 24+5-Pin Cable

A cable that goes straight from a Hirose DF9 board connector to a DVI-I 24+5-pin plug — no adapter in between. It is for equipment where the display or video signal has to come off a board-level DF9 header and land on a standard DVI-I socket, the sort of link you find inside diagnostic and analytical machines.

One end is the DF9: a slim black rectangular housing with a cream insert, and you can see the twisted multi-colour wires fanning into it. The other end is a DVI-I 24+5-pin male plug in a black moulded shell with thumbscrews, so it stays seated once it is screwed in. The middle is a plain black round jacket, coiled in the photo, with jacket print just about legible (105 °C, E215319).

This is a cable used with equipment, not a medical device itself, and nothing on this page claims medical certification or patient-contact safety. It suits diagnostic and analytical equipment and medical-device subassemblies after device-level validation, plus laboratory instruments and service fixtures. The pin mapping and the length are set per order, so confirm them against your drawing — the connector pairing is the fixed part, the rest follows the host equipment.

The construction shown is AWG28, UL Listed (UL1571), as printed on the product card in the photo. No resolution or bandwidth figure is given in the source, so none is claimed here: what the link can carry depends on the equipment on both ends and the ordered configuration.

Key facts

  • Hirose DF9 connector to DVI-I 24+5-pin male plug
  • DVI-I plug in a black moulded shell with thumbscrews
  • Twisted multi-colour wires visible at the DF9 end; black round jacket
  • AWG28, UL Listed (UL1571) (as printed on the product card in the photo)
  • Length: not stated — confirm before ordering
  • Pinout: custom / to be confirmed against the production drawing

Compatibility

Fits equipment with a mating Hirose DF9 header on one side and a DVI-I socket on the other. The DVI-I plug is male, 24+5 pins. Check the DF9 variant, the keying and the pin mapping against your board before ordering.

Application scenarios

  • Display and video links inside diagnostic and analytical equipment
  • Medical-device subassemblies after device-level validation
  • Laboratory instruments and service fixtures
  • Equipment-specific replacement display leads, once the mating connectors and wiring are confirmed

Links

Related models: Detachable LC HDMI Fiber Optic Cable 4K, Detachable HDMI 2.1 Active Optical Cable for Conduit Installation, Long-Distance HDMI Active Optical Cable Product Family. Also browse the full range on the AOC HDMI cable overview page.

External link: AVAGO optical fiber cables — TOCP Fiber Cable.