RJ45 to TV 9.5 mm Coaxial Patch Cable

A patch lead that runs from an RJ45 port to a 9.5 mm TV coaxial plug in one piece — no adapter needed. The RJ45 end is a shielded plug with a ribbed white boot; the TV end is a smooth metal 9.5 mm barrel with a centre pin, in a white moulded body. White flexible RG59/U-style cable, built as a starting point for OEM equipment jobs where the pinout and length are specified to the drawing.

Some equipment hides a TV-style coaxial socket where you would expect a network port, or the other way round — wireless modules, gateways and telemetry boxes are the usual suspects. This cable bridges the two directly: RJ45 on one end, 9.5 mm TV coaxial on the other, so you are not bolting an adapter onto a standard lead and hoping it holds.

In the photo the RJ45 plug is shielded, with a clear latch you can see through to the contacts and a ribbed white strain-relief boot. The TV plug is the familiar smooth push-in 9.5 mm barrel with a centre pin, set in a white moulded housing with a short collar where it meets the cable. The cable is white, round and flexible, and the product card describes it as UltraFlex, AWG22, RG59/U.

As with all of these equipment leads, the connector shapes are only half the story. Which RJ45 pins connect to the coaxial centre and shield is defined per project, so it has to come from the drawing or an approved sample — do not assume a standard wiring. Length is not stated in the source either, so confirm it before ordering.

Key Facts

  • RJ45 plug to TV 9.5 mm coaxial plug, one continuous assembly
  • Shielded RJ45 plug with clear latch and ribbed white strain-relief boot (visible in the photo)
  • Smooth metal 9.5 mm TV coaxial plug with centre pin and white moulded body (visible in the photo)
  • White round flexible cable; product card identifies the shown construction as AWG22, RG59/U, described as UltraFlex
  • Custom length, pinout, labelling and packaging can be specified for production projects
  • Length: not stated — confirm before ordering
  • No bandwidth, impedance, power or ingress claim is made for this cable; performance depends on the approved construction and the mating equipment

Compatibility

Made for equipment with a mating RJ45 port on one side and a mating 9.5 mm TV coaxial socket on the other — typically wireless modules, gateways and telemetry or communications equipment. Check the pinout against your device before ordering: the wiring is defined per project, not fixed by the connector shapes alone.

Application Scenarios

  • Wireless modules and gateways
  • Telemetry and communications equipment
  • Embedded or external antenna integration
  • Equipment-specific replacement leads, once the mating connectors and wiring are confirmed

Links