1. Home
  2. Our Products
  3. HDMI Cable
  4. AOC HDMI CABLE
  5. White Braided 8K HDMI 2.1 Active Optical Cable

White Braided 8K HDMI 2.1 Active Optical Cable

A white 8K HDMI 2.1 active optical cable with a red-and-black braided jacket. The braid takes the knocks that a plain jacket does not, and the white housings keep it looking tidy in a living room or meeting room. Ends are marked Source and Display.

Categories: ,

This is an active optical HDMI cable, built for distance. The picture travels over fibre for the long stretch, with copper kept for the low-speed control lines. That is what lets it carry a high-bandwidth picture further than a passive copper cable of the same length, and it picks up less interference along the way. The jacket is braided in red and black, which is tougher and more snag-resistant than a smooth jacket — useful where the cable gets moved, pulled through trunking, or run across a floor. The housings are white, printed “HDMI”, with Source / Display labels and a small direction arrow on each. It only works one way round, so check the labels before you plug it in. On performance: versions of this cable are rated up to 48 Gbps, 8K at 60 Hz and 4K at high refresh rates. That only holds with HDMI 2.1 equipment on both ends and with the validated cable version, so confirm the version and length you are ordering before you promise a customer a specific number. Good for an 8K TV fed from a rack in another room, a 4K high-refresh gaming setup, a big presentation screen, or any run where the source and the display sit a long way apart.

Key facts

  • Directional HDMI Type-A (source) to HDMI Type-A (display)
  • White connector housings, printed “HDMI”
  • Source and Display labels, plus a direction arrow
  • Red-and-black braided outer jacket (visible in the photo)
  • Hybrid optical signal path (fibre for high-speed data, copper for control)
  • 8K HDMI 2.1 positioning; versions rated up to 48 Gbps / 8K at 60 Hz / 4K at high refresh — applies only to validated configurations with compatible HDMI 2.1 source and display equipment
  • Length: not stated in the source — confirm before publishing
  • Exact link rate and refresh capability depend on the SKU ordered

Compatibility

Works with HDMI source devices (media players, games consoles, PCs, AV receivers) and HDMI displays (TVs, projectors, monitors) that support the resolution you need. Both ends must be HDMI Type-A. The cable is directional: the Source end goes to the source device, the Display end to the display.

Application scenarios

  • 8K display links
  • 4K high-refresh gaming setups
  • Large-format presentation systems
  • Long equipment-rack to display connections
  • Home theatre, commercial AV, digital signage, control and visualisation rooms

Links

Related products: browse the full range on the AOC HDMI cable overview page. See also the White Close-Up 8K HDMI 2.1 Active Optical Cable.

External link: Changzhou Jinshang Electronic Technology — fibre optic cable manufacturer.