F male connector 75ohm Coax Cable to Cat5 RJ45 Balun Satellite Converter Adapter Cable, RJ45 to type F (9.5TV or IEC)

A passive F male to RJ45 male balun with a small IEC 9.5 mm adapter in the box — for sending a TV signal down a Cat5e run instead of coax.

SKU: FEV-BL1003 Categories: ,
General Details

A passive balun adapter for sending a TV signal down a Cat5e cable instead of coax. The photo shows the short white coiled cable with three things in it: a silver threaded F male connector (centre conductor visible face-on), a small black IEC 9.5 mm male adapter in the middle, and a shielded RJ45 male plug. The F end goes to the coax side, the RJ45 end goes to the network cable, and the IEC adapter lets the same cable finish at a TV aerial socket.

It comes as a pair — sender and receiver, one at each end of the Cat5e run — and it works with the usual TV distribution gear: CATV splitters, amplifiers and cable modems. No power supply, just the two units and the cable between them.

Please read before ordering: the spec table printed in the old text says Part # FEV-BL1002, but the SKU field on this listing says FEV-BL1003 — confirm which part number you need before ordering.

Key facts

  • Product: F male 75 ohm coax cable to Cat5 RJ45 balun satellite converter adapter
  • Model / SKU: FEV-BL1003 (spec table in the old text prints Part # FEV-BL1002 — see the note above)
  • In the box: 2 units, a pair (sender & receiver)
  • Ends: F male + shielded RJ45 male, with a small IEC 9.5 mm male adapter
  • Coax: 2 m RG6 per unit
  • Type: passive, no external power required
  • Bandwidth: 40 MHz to 2.4 GHz; 3 dB bandwidth 40 MHz to 1 GHz
  • Insert loss: <3 dB at 40–1 GHz; return loss >18 dB at 40–1 GHz; CMRR -20 dB or higher at 40 MHz–1 GHz
  • UTP cable: CAT5e/6, 24 AWG, impedance 100Ω
  • Distance: up to 30 m at 2.4 GHz frequency; max. up to 100 m based on low frequency
  • Temperature: operation 0 to 55°C, storage -20 to 85°C, humidity up to 95%
  • Works with: CATV splitters, amplifiers and cable modems; sends broadband CATV, VHF, UHF and FM signal over Cat5e cable
F Male Connector RF to RJ45 Balun Adapter Coax Cable with F to IEC Adapter

F Male Connector RF to RJ45 Balun Adapter Coax Cable with F to IEC Adapter

F Male RF Connector to RJ45 CAT5 CAT6 Ethernet Converter Coax Cable with F Female to IEC TV Male Connector

F Male RF Connector to RJ45 CAT5 CAT6 Ethernet Converter Coax Cable with F Female to IEC TV Male Connector

instructions of F Male to RJ45 Balun Coax Cable

Good for

A satellite or CATV feed that has to cross a building on network cable — the balun pair replaces the long coax run, and the IEC adapter covers the TV end.

Specification instruction of 75ohm Coax Cable to Cat5 RJ45 Extender Balun coax cable

Specification instruction of 75ohm Coax Cable to Cat5 RJ45 Extender Balun coax cable

Related products

Balun TV converter cable, PAL IEC 9.5 TV male to RJ45 — FEV-BL1001 · Television balun satellite, RJ45 male to F type male — FEV-BL107 · CATV adapter cable, RF over Cat5e extender — FEV-BL109

More coax and network cables: TOCP fiber cables

Questions about this cable? Email sales@fevelectronics.com — that’s the fastest way to reach us.

Instructions

F male connector 75ohm Coax Cable to Cat5 RJ45 Balun Satellite Converter Adapter Cable, RJ45 to type F (9.5TV or IEC)

Specification instruction of 75ohm Coax Cable to Cat5 RJ45 Extender Balun coax cable

Specification instruction of 75ohm Coax Cable to Cat5 RJ45 Extender Balun coax cable