- Home
- Our Products
- TV & SAT
- RF ANTENNA CABLE
- Television Balun Satellite RJ45 Male to F type Male Adapter Coax Cable (IEC 9.5MM TV Male)
Television Balun Satellite RJ45 Male to F type Male Adapter Coax Cable (IEC 9.5MM TV Male)
A three-piece balun kit that gets a TV signal from an RJ45 wall outlet to a TV's IEC aerial socket — the F connector sits in the middle, not at the end.

Television Balun Satellite RJ45 to F type Male Coax Adapter Cable
This one is a kit, not a single cable — three pieces that screw together. Read the title carefully, because the F connector is in the middle of the assembly, not at the end you plug in. The photo shows all three pieces laid out: the white coax in the middle, a small black IEC adapter, and the RJ45 plug.
How it goes together: (1) a balun adapter, RJ45 male to F female; (2) a coax cable, F male to F male; (3) an adapter, F female to IEC 9.52 mm male. Once assembled, the two ends you actually plug in are the RJ45 male and the IEC 9.5 mm male — the RJ45 end goes to the wall outlet, the IEC end goes to the TV. The F connectors join the pieces to each other. The diagram in the photos shows the same thing: the cable ends are male, and the sockets they plug into (RJ45 female, IEC 9.52 mm female, F female) are on the wall and the TV side.
Please read before ordering: two numbers on this page don’t agree, and we left both as they are instead of picking one. The spec table printed in the old text says Part # FEV-BL1002, but the SKU field on this listing says FEV-BL107 — confirm which part number you need before ordering. The sizes disagree too: the French text gives 11.7 x 1.5 x 40 mm (which looks like the adapter body only), while the spec table gives 14.2 x 15.6 x 2000 mm. The 2000 mm is the cable length. The rest of the spec table is copied below exactly as printed.
Key facts
- Product: television balun satellite adapter coax cable, RJ45 male to F type male (IEC 9.5 mm TV male)
- Model / SKU: FEV-BL107 (spec table in the old text prints Part # FEV-BL1002 — see the note above)
- Kit: 3 pieces — RJ45 male / F female adapter + F male / F male coax + F female / IEC 9.52 mm male adapter
- Ends you plug in: RJ45 male + IEC 9.5 mm male
- Length: 2 m, per the spec table dimensions (14.2 x 15.6 x 2000 mm)
- Type: passive, no external power required; package includes 2 units, a pair
- Bandwidth: 40 MHz to 2.4 GHz (French text: 5–2400 MHz)
- 3 dB bandwidth: 40 MHz to 1 GHz; insertion loss <3 dB at 40–1 GHz (French text: <2 dB at 900 MHz, <3 dB at 2.2 GHz)
- Return loss: >18 dB at 40–1 GHz; CMRR -20 dB or higher at 40 MHz–1 GHz
- UTP cable: CAT5e/6, 24 AWG, impedance 100Ω
- Distance: based on frequency or input video signal level, max. up to 100 m; up to 30 m at 2.4 GHz
- Temperature: operation 0 to 55°C, storage -20 to 85°C, humidity up to 95%
- Works with: CATV, satellite, VHF, UHF and FM signal over Cat5e cable; CATV splitters, amplifiers and cable modems

F Male Connector RF to RJ45 Balun Adapter Coax Cable with F to IEC Adapter

F Male RF Connector to RJ45 CAT5 CAT6 Ethernet Converter Coax Cable with F Female to IEC TV Male Connector

Good for
A satellite or TV feed that has to travel over network cable — one adapter at each end of a Cat5e run, with the coax only covering the last stretch to the set.

Specification instruction of 75ohm Coax Cable to Cat5 RJ45 Extender Balun coax cable
Related products
F male to RJ45 balun coax cable, 75 ohm — FEV-BL1003 · Erard balun cord, IEC 9.52 mm male to RJ45 male — FEV-BL-1005 · CATV adapter cable, RF over Cat5e extender — FEV-BL109
More coax and network cables: TOCP fiber cables
Questions about this cable? Email sales@fevelectronics.com — that’s the fastest way to reach us.



