- Home
- Our Products
- OPTICAL FIBER CABLES
- GOF Fiber Jumper
- SC/ST/FC/LC/SMA Multimode Fiber
- SMA905 - FC 1000um 500um Single Mode Optical Fiber Cable Assembly
SMA905 – FC 1000um 500um Single Mode Optical Fiber Cable Assembly
SMA905–FC fiber cable assembly — SMA905 on one end, FC on the other, 1000 um / 500 um in the title. The body states the transmission medium as POF (plastic optical fiber), 1 mm core, outer OD 2.2 mm black PE, wavelength 650 ± 15 nm, attenuation 0.3 dB/m, wire length 0.1 m to 40 m optional. The two photos show the assembly with its SMA905 and FC ends.
Please read before ordering: the title and the body do not agree. The title says “Single Mode”, but the body says the medium is POF (1 mm plastic fiber) — plastic optical fiber is not single-mode glass fiber, and the body never mentions single-mode anywhere else. The title also says “1000um 500um”, but the body only states POF 1 mm (1000 um) — no 500 um figure appears anywhere. And the supplier boilerplate pasted on the page is about HCS hard-plastic-clad quartz fiber (200/230 um) — a third, different fiber type that appears in neither the title nor the spec line. Go by the POF figures in the body (1 mm core, 650 nm, 0.3 dB/m) and confirm the fiber type, the core size, and the length before ordering — do not order this as a single-mode glass assembly.
Key facts
- Interface: SMA905–FC
- Medium (per body): POF, 1 mm core
- Outer OD: 2.2 mm, black PE
- Wavelength: 650 ± 15 nm
- Attenuation: 0.3 dB/m (as stated)
- Length: 0.1 m–40 m optional
- SKU: SMA905 – FC
Good for
An SMA905-to-FC link over plastic fiber — check the fiber type first, because the title’s “Single Mode” does not match the body’s POF spec.
Related products
SMA905 to FC plastic optical fiber jumper — the same ends, with its own spec list · FSMA905 2.75 mm FC1000 industrial patch cord · SMA905 fluorescent fiber optic jumper
More fiber optic jumpers: BH Cables

SMA905 to FC 1000um 500um Single Mode Optical Fiber

SMA905 – FC 1000um 500um Single Mode Optical Fiber


