FSMA905 2.75mm FC1000 Industrial Fiber Optic Patch Cord

FSMA905 2.75 mm FC1000 industrial fiber optic patch cord — SMA905 to FC, POF 1 mm core.

SKU: FSMA905 2.75mm FC1000 Category:

FSMA905 2.75 mm FC1000 industrial fiber optic patch cord — an SMA905-to-FC patch cord for industrial use. The body states the transmission medium as POF (plastic optical fiber), 1 mm core, outer OD 2.2 mm black PE, wavelength 650 ± 15 nm, attenuation 0.3 dB/m, wire length 0.1 m to 40 m optional. The two photos show the patch cord with its connectors.

Please read before ordering: the title and the body do not agree on the size. The title says 2.75 mm, but the body says the outer OD is 2.2 mm — no 2.75 mm figure appears anywhere in the body. The “F” in FSMA905 and the “1000” in FC1000 are also title-only; the body’s interface type just reads “SMA905-FC”. And “Industrial” is title-only too — the body is the same generic POF text used on the non-industrial siblings, so nothing on the page explains what makes this one industrial. Go by the body’s figures (POF 1 mm, OD 2.2 mm, 650 nm, 0.3 dB/m) and confirm the diameter and the length before ordering.

Key facts

  • Interface: SMA905–FC (per body)
  • Medium (per body): POF, 1 mm core
  • Outer OD: 2.2 mm, black PE (title says 2.75 mm — see the note above)
  • Wavelength: 650 ± 15 nm
  • Attenuation: 0.3 dB/m (as stated)
  • Length: 0.1 m–40 m optional
  • SKU: FSMA905 2.75mm FC1000

Good for

An industrial SMA905-to-FC patch run over plastic fiber — confirm the 2.75 mm against the 2.2 mm in the body before ordering.

Related products

SMA905 to FC plastic optical fiber jumper — the same ends, with its own spec list · SMA905–FC 1000 um / 500 um fiber cable assembly · FC–FC plastic fiber transparent cable, large core

More fiber optic jumpers: TOCP fiber cables

FSMA905 2.75mm-FC1000 Industrial Fiber Optic Patch Cord

FSMA905 2.75mm-FC1000 Industrial Fiber Optic Patch Cord

FSMA905 2.75mm FC1000 Industrial Fiber Optic Patch Cord

FSMA905 2.75mm FC1000 Industrial Fiber Optic Patch Cord