Starlink Gen 3 Adjustable Aluminum Roof Mount Kit
A complete roof mount kit for a Starlink Gen 3 / V3 Standard dish. It comes with a pivot base, a pipe adapter, an aluminum mast, sealant tape, screws, cable clips, and an Allen wrench. The base bolts to a shingled roof, the mast pivots up to 90 degrees so the dish can be aimed at open sky, and the dish drops onto the mount.
This kit covers a fixed roof install in one box. The die-cast base bolts down onto a shingled roof with lag screws, with sealant tape under it to keep water out. The aluminum tube mast sits in the base on a pivot. That pivot turns through 90 degrees, so the mast can sit upright on a sloped roof and the dish ends up level with a clear view of the sky. The dish adapter at the top of the mast takes the Gen 3 terminal. A separate pipe adapter is also in the box, for installs where the dish needs to sit on a pipe instead of the supplied mast. Install is a drilled job: drill the base holes, press sealing tape into them, set the base, and tighten the lag screws snug plus a quarter turn. The base has small embossed arrows that face up toward the ridge. After the base is set, the arm angle is set with the twist knob and locked. Cable clips are included to run the cable down the roof in a tidy line. One gap in the source files: nothing lists which dishes this does NOT fit. The TXT files only say “selected Starlink Gen 3 / V3 standard terminals”. Do not write a “does not fit” list on the page until the supplier confirms one.
Key facts
- Fits: selected Starlink Gen 3 / V3 standard terminals
- Main structure: aluminum support tube and die-cast roof base; terminal adapter is molded or aluminum, depending on model
- Adjustment: pivot turns through 90 degrees
- Base size: 223 mm (8.78 in) tall, 140 mm (5.5 in) wide
- Arm reach: 235 mm (9.25 in) from the mounting face to the mast
- Install: drilled attachment to a structurally suitable shingled roof; professional install and waterproof sealing recommended
- Vertical-mount clearances: more than 4 in / 100 mm between the mounting arm and the mounting surface, and more than 1 in / 25 mm between the support bar and the roof
- Colour: dark grey / black (as shown in the images)
In the box
- Pivot mount x 1
- Pipe adapter x 1
- Mast x 1
- Allen wrench x 1
- Sealant tape strips x 2
- Sealant tape squares x 2
- Lag screws x 2
- External hexagon screws x 2
- Cable routing clips x 20
Compatibility
Fits Starlink Gen 3 / V3 Standard terminals. Compatibility with other dishes is not stated in the source files: the source files do not say whether it fits Gen 2, Mini, or High Performance dishes.
Do not use on unsuitable roof materials or weak substrates without an approved method.
This is a third-party compatible accessory, not an official SpaceX product. Starlink is a trademark of SpaceX.
Application scenarios
- New Gen 3 installs on shingled roofs at homes, cabins, and workshops
- Small-business buildings and farm buildings that need a fixed, elevated dish
- Wall-facing and balcony installs, as shown in the dimensions image — the pivot base also bolts to a vertical face
- Replacement or upgrade of an existing Gen 3 roof mount