Waterproof Armored HDMI Active Optical Cable with Sealed Couplers
An armored HDMI active optical cable for jobs where an ordinary cable would not survive. The cable has a metal-armored core, and each end sits inside a sealed coupler with a tethered cap, so the connectors stay covered when the cable is unplugged. Built for events, staging, venues and factory floors.
This cable is made for rough handling. Under the outer jacket there is a metal armor layer — you can see it in the cross-section diagram, with the fibre and copper cores, the Dupont Kevlar strength member and the armored layer labelled. That is what protects the fibre when the cable gets stepped on, pulled through a gap, or run across a busy floor. Each end has a sealed inline coupler. The HDMI connector slides out of the coupler housing when you need to plug in, and when it is not in use a tethered cap screws over the opening to keep dust and water out. The caps are marked M25 x 1.5. The coupler bodies are marked “Waterproof Connector”. The HDMI connectors themselves are screw-secured, with two screws on each housing, and clearly labelled Source and Display. The cable is directional — Source end to the source device, Display end to the display. A word of caution: the photos and text show sealed couplers and armored construction, but no formal IP rating, crush rating or outdoor certification is given anywhere in the source. Do not promise a specific waterproof rating. The source text itself says the cable is for outdoor-adjacent installs with additional enclosure protection, not for direct exposure. The cross-section artwork is captioned “Armored HDMI 2.1 AOC”. No resolution, bandwidth or length is stated for this product, so confirm the version and length before quoting numbers to a customer.
Key facts
- Directional HDMI Type-A (source) to HDMI Type-A (display)
- Armored construction: metal armor layer visible in the cross-section diagram; stripped-cable photo shows the steel spiral armor
- Sealed inline couplers with tethered dust caps; caps marked M25 x 1.5; coupler bodies marked “Waterproof Connector”
- Screw-secured HDMI connector housings (two screws per housing), Source and Display labels
- Hybrid optical signal path (fibre for high-speed data, copper for control)
- Cross-section artwork captioned “Armored HDMI 2.1 AOC” — the only HDMI version reference for this product; no resolution or bandwidth figure is stated
- No IP rating, crush rating or outdoor certification is given in the source — do not claim one
- Length: not stated in the source — confirm before publishing
- Connector housings appear in both black and silver in the supplied photos — confirm whether these are two colour variants
Compatibility
Works with HDMI source devices (media players, PCs, AV receivers, event playback systems) and HDMI displays (TVs, projectors, LED walls, monitors). Both ends must be HDMI Type-A. Directional: Source end to the source device, Display end to the display.
Application scenarios
- Temporary event cabling
- Protected equipment links
- Factory-floor routing
- Outdoor-adjacent installations with additional enclosure protection
- Events and staging, industrial displays, large venues, control systems, AV rental fleets
Links
Related products: browse the full range on the AOC HDMI cable overview page. See also the White Braided 8K HDMI 2.1 Active Optical Cable and the White Braided 4K HDMI Active Optical Cable.
External link: MOST Fiber Optic Extension Cable Assembly — fibre optic cable product.